| |
|
|
|
 |
 |
|
Other Materials
|
PFA (Perfluoroalkoxy)
Ultimate chemical resistance up to 250°C used extensively in chemical processing industry. Suitable for food contact. Rod, tube, machined and moulded components |
| |
PPS
A lower cost option to PEEK offering excellent load bearing and wear resistance up to 220°c. Generally reinforced for rigidity and stability. Rod, tube, machined and moulded components. |
| |
PVDF (Polyvinylidene Fluoride)
A crystalline fluorinated polymer with excellent resistance to inorganic acids and gasses. Particularly suitable for bromine and chlorine with temperature limit of 160°C. Rod, tube, machined and moulded parts. |
| |
FEP
A fluorinated copolymer for aggressive chemical service at temperatures to 205°C. Particularly suitable for mixed acides and solvents. Suitable for food contact. Rod, tube, machined and moulded components. |
| |
PEEK
For high strength engineered components, bearings and seals. Particularly in hot corrosive environments. The Fluorinoid range offers materialsoptions for low friction no lubricate earings. Enhanced resilience for sealing. Maximum temperture for long term use 250°C. Rod, tube, machined and moulded components. |
| |
PS/PES
Pigmented or transparent thermoplastics give high strength, rigidity and outstanding resistance to high temperature water and steam. Rod, tube, machined and moulded components. |
| |
|
ETFE
A tough, strong copolymer with good combination of chemical and thermal properties up to 150°C. Better strength and resistance to wear and abrasion than PTFE but lower resistance to corrosion. Rod, tube, moulded and machined parts. |
|
| |
| |
|
|
|
| Related Pages |
|
|
|
Browse by
Market Sector |
|
|
|
|
|
|
