About Us

Testimonials


"The Fluorocarbon sample reduced thrust due purely to friction by 1000lbf (I.E. required thrust that was measured to operate the valve under no pressure, so the seal friction was considerably reduced) compared to legacy seal design. The Fluorocarbon sample showed less wear compared to legacy design after 100 cycles of closing, pressuring to 5000psi, then opening to dump pressure.  Test here was performed with water. The Fluorocarbon seal material seems to be more suited to the abrasive mud media this valve is meant to be used in, i.e. the fluorocarbon seal is harder and more rigid compared to the legacy seal." JB. USA


“I am pleased & can confirm that the parts have passed our internal inspection. We are happy with the overall quality of the parts and the level of inspection data provided. Please keep up the good work !” L. UK


"Last Wednesday we have successfully performed the load-out operation. The operation went very smooth without any issues. Friction values ranging between 5% and 8% during the skidding operation to the quay edge. Once on the barge, with a close to perfect skid beam, the friction values eventually even dropped to 4.5% for ‘break-out’ with a new stroke, to 2.2% during the stroke. Thank you very much for your support in this project! " PD. Netherlands


"Thank you very much for your quickly answer. Your offer is acceptable and you will receive the PO shortly" GM. Italy


“We have already received the parts, they are great!” I. Sweden


"I have just had the delivery of the parts and thanks very much for delivering them early." K. UK


"Received the back-up rings today. Thanks for an excellent service." JH. UK


"I have had the parts delivered this morning, I just wanted to say thank you for all your efforts in bringing this order forwards to meet our customer demand, I really appreciate it." KS. UK


"I want to thank you for your professionalism, I enjoyed to work with you very much." TJ. USA


"The Product Manager has been superb to work with, his attention to detail was brilliant." CR. UK


"We received the PTFE sheet and it looks really good. Thanks for getting this done for us." AD. USA


"The goods have arrived and gone to the customer. I just wanted to thank you both for your efforts in getting these parts to us." KS. UK


"Great. Thanks everyone for getting this order through so quickly." LC. UK


"GREAT!!!!

THANK YOU VERY MUCH

THANK YOU VERY MUCH AGAIN" BM. Italy